Install the PiTDM module with Digium offical GUI

We built a new firmware which provides the PiTDM to work with Digium offical GUI which is faster and easy to use than Raspbx. It also support Pi 3 B+, Pi 3, Pi 2, B+, B and A models. You can download it in here. Here is a guide to show how to use it.

First of all, follow the Manual of installing PiTDM module in here to install the PiTDM module, when finished the PiTDM module’s installation, then download the firmware from the link that it is shown above.

unzip it:

gunzip switchpi-digium-gui-1.0.1.img.zip

Use the dd to copy it to a 4G at least SD card,

dd if=switchpi-digium-gui-1.0.1.img of=/dev/mmcblk0 bs=4M

When done, power up the Raspberry Pi with followed the Manual of installing PiTDM module in here. The default IP is 192.168.1.98, and the link is http://192.168.1.98:8088/gui/static/config/index.html. The GUI username is admin and password is admin, please change it to a stronger password when you log into the GUI.

Screen Shot 2018-07-03 at 3.59.13 PM

The below picture shows how the Digium GUI detected a 2 FXS module and a 2 FXO module

Screen Shot 2018-07-03 at 3.59.26 PM

We built a default SIP extension and one FXS channels that if you have FXS module installed which you can use it to test our PiTDM by quickly, it looks like below

Screen Shot 2018-07-03 at 4.08.04 PM

 

Then you can create the default Dialplan and incoming calling rules or outgoing calling rules, and connect your PSTN cable to make the calls.

The SSH login default username/password is pi/raspberry.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s